GORI "Sport" racing exhaust for Lambretta Series 1-3 /gp 125-200cc
FITS Standard cylinder and Mugello /Rapido/casa 185/BGM RT kits
(please note Gori logo on side is silver bare steel and the body is clear laquered)
If you are looking for an exhaust system with an original looking appearance but increased potential performance, then look no further than this particular racing exhaust, produced by GORI! The traditional racing exhaust design was deliberately avoided in its development, enabling the overall original look of the Lambretta could be maintained following its attachment. Nevertheless its power delivery and overall performance is impressive across the whole of the rev range. There are three versions of this particular exhaust pipe being hand made in Italy by GORI. The 'Sport' type, with a 40mm diameter manifold connection, is suitable for use with all standard, cast iron and lightly tuned cylinders
" They say" :-
Though using state-of-the-art technology and materials, these exhausts are strictly derived from the very same ones that fit the scooters used for the Monza speed tests.
Giancarlo Gori himself developed all necessary solutions to make this pipe the best possible match for any Lambretta engine, including the top performing ones of today, up to 230cc.
Please note that we deliberately avoided a motorcycle-derived construction scheme as our aim was to reach top performance while maintaining, at the same time, the original standard look of the vehicle.
By fitting this competition exhaust, your Lambretta will maintain its original appearance but with a substantial increase in power and torque, combined with a nice, sweet “racing” exhaust sound.
In order to reach the definitive configuration, this exhaust was tested on several roads and test benches, and it has been matched with different engines and cc capacities: tuned, highly tuned and standard.
In all of these configurations we have always reached outstanding acceleration rates and overall top speed performance which you can now experience on your own Lambretta scooter. Giancarlo Gori
LAMBRETTA GORI SPORT RACING EXHAUST
- Brand: ITALIAN MADE
- Product Code: SH
- Availability: Out Of Stock
-
£0.00
- Ex Tax: £0.00
Related Products
LAMBRETTA HORNCAST BEADING GREY LI3/SX
LAMBRETTA Li series 3 sx tv3 special grey horncasting strips x2 Italian made..
£3.00 Ex Tax: £2.50
LAMBRETTA HORNCAST BEADING BLACK GP/SX
LAMBRETTA GP black horncast beading strips x2 Will fit series 3 sx/li models..
£3.99 Ex Tax: £3.33
LAMBRETTA REAR LIGHT RUBBER GASKET GP/SX.BLACK
Lambretta black series 3 li /sx /tv /gp rear light rubber gasket .QUALITY MADE...
£3.00 Ex Tax: £2.50
LAMBRETTA REAR LIGHT GASKET SERIES 1/2 LARGE -CREAM
Casa rear light gasket rubber series 1 & 2 grey large type In cream as per original..
£3.00 Ex Tax: £2.50
LAMBRETTA REAR BRAKE ADJUSTER STAINLESS STEEL
LAMBRETTA Stainless steel rear brake adjuster Excellent quality ALLOY ADJUSTER NUT..
£14.00 Ex Tax: £11.67
LAMBRETTA FUEL TANK 13 LITRE TWIN CUT OUT
LAMBRETTA LARGE FUEL TANK 13 litre with twin cut outs un painted STEEL , for all models,inclu..
£110.00 Ex Tax: £91.67
LAMBRETTA CLUTCH SPRINGS STANDARD
LAMBRETTA Set of 5 standard clutch springs,(Slighty stronger that standard ), good quality ,&n..
£8.00 Ex Tax: £6.67
LAMBRETTA CLUTCH 1.5MM METAL PLATES
LAMBRETTA CLUTCH 1.5mm clutch metal slipper plates, these are standard fitment thickness for all LI/..
£3.88 Ex Tax: £3.23
LAMBRETTA CLUTCH 1.2MM METAL SLIPPER PLATES
Clutch metal slipper plates EACH New thinner type for more clutch travel 3 NEED FOR STD 4 PLATE ..
£2.75 Ex Tax: £2.29
LAMBRETTA CYLINDER HEAD COWLING STANDARD
Standard cylinder head cowling Fits all models , thicker gauge than original...
£27.99 Ex Tax: £23.33
LAMBRETTA DRIVE SIDE OIL SEAL PLATE SCREWS COUNTER SUNK ALLEN HEAD
LAMBRETTA DRIVESIDE OILSEAL PLATE , COUNTER SUNK ALLEN HEAD Set of 4 screwsFITS ALL MODELS NO. ..
£1.00 Ex Tax: £0.83
LAMBRETTA EXHAUST STUD ON ENGINE CASE 8MM
8mm EXHAUST SILENCER stud ON ENGINE CASE FITS ALL LAMBRETTA..
£2.00 Ex Tax: £1.67
LAMBRETTA EXHAUST STUD 7MM
7mm exhaust stud for Lambretta STANDARD LENGTH 27MM FOR STANDARD CYLINDERS..
£1.00 Ex Tax: £0.83
LAMBRETTA EXHAUST MANIFOLD SPRING WASHER 7MM
LAMBRETTA EXHAUST MANIFOLD SPRING WASHER 7MM Fits all li to gp models ... EACH ..
£0.20 Ex Tax: £0.17
LAMBRETTA FORK DAMPER GAITERS-BLACK
Front fork gaiters for Lambretta's, As per 1960's original, Fits all ORIGINAL SLIM TYPE DAMPERS..
£19.99 Ex Tax: £16.66
LAMBRETTA FLOOR ALLOY CHANNELS LI3/GP SET OF 4
Lambretta series 3 legshield floor alloy channels fits all series 3 models to gp Set of 4..
£12.00 Ex Tax: £10.00
LAMBRETTA BRAKE/CLUTCH LEVERS 19mm BALL END SERIES3/GP
LAMBRETTA 19mm ball end brake & clutch levers for series 3 models (pair) Italian made BY FA ITA..
£18.99 Ex Tax: £15.83
LAMBRETTA IMOLA EXHAUST COPPER GASKET
LAMBRETTA Imola 186/ 225, ts1 200/225, rb200/225/25O special made copper exhaust gasket..
£2.25 Ex Tax: £1.88
LAMBRETTA EXHAUST GASKET BIG BORE
LAMBRETTA bigbore exhaust gasket SUITABLE FOR TUNED EXHAUST PORTS AND EXHAUST -COPPER Fits ORIGINA..
£2.80 Ex Tax: £2.33
LAMBRETTA INLET MANIFOLD GASKET 125/150/175
Lambretta inlet manifold gasket fits all LI SX GP TV 125/150/175 ..
£0.80 Ex Tax: £0.67
LAMBRETTA INLET MANIFOLD GASKET 200
LAMBRETTA sx tv gp 200 inlet manifold gasket ALSO FITS BGM 195 CYLINDER KIT ..
£0.80 Ex Tax: £0.67
LAMBRETTA SNETTERTON RACE SEAT
LAMBRETTA CLASSSIC Snetterton old race style single seat remade to original design Excellent quali..
£99.99 Ex Tax: £83.33
LAMBRETTA SPEEDO GLASS SERIES 3 LI,SX,TV & GP
Lambretta speedo glass fits series 3 Li,SX,TV & GP models..
£3.50 Ex Tax: £2.92
LAMBRETTA CLUTCH HOLDING TOOL
Clutch holding tool for Lambretta All li/gp/sx and tv series 2&3..
£15.99 Ex Tax: £13.33
LAMBRETTA STEERING LOCK WITH FLAP SERIES 1&2
LAMBRETTA SERIES 1 & 2 STEERING LOCK AND FLAP COVER AS GENUINE TYPE , GOOD QUALITY..
£23.30 Ex Tax: £19.42
LAMBRETTA FUEL TANK CAP
LAMBRETTA FUEL TANK CAP WITH RUBBER SEAL ...FITS ALL MODELS, GOOD QUALITY ..
£6.99 Ex Tax: £5.83
LAMBRETTA HORNCAST TO MUDGUARD BEADING LI 1+2 GREY
CASA LAMBRETTA LI SERIES 1+2 HORNCAST BASE TO MUDGUARD BEADING GREY ITALIAN..
£1.00 Ex Tax: £0.83
LAMBRETTA STEERING LOCK S3 LI SX TV GP
Lambretta series 3 & DL/GP C.A.M.A. steering lock with keys. A great copy of the original ..
£14.25 Ex Tax: £11.88
LAMBRETTA GP ELECTRONIC SEAT
LAMBRETTA GP200 ELECTRONIC SEAT , WELL MADE GOOD QUALITY REPLICA SEAT . WILL ALSO FIT SERIES1/..
£155.00 Ex Tax: £129.17
LAMBRETTA HANDLEBAR GRIPS EXTRA GRIP GREY & BLACK S3/GP +PX T5
PAIR OF GREY AND BLACK GRIPS 22-24MM INT DIA. SUITABLE FOR VESPA PX/ RALLY ,SPRINT,GL, ,LAMBRETTA LI..
£9.99 Ex Tax: £8.33
LAMBRETTA EXHAUST STUD 7MM EXTRA LONG TS1 RB
LAMBRETTA 7MM EXHAUST STUD SPECIAL SIZE EXTRA LONG 41MM - SUITABLE FOR TS1 ,RB,IM..
£1.50 Ex Tax: £1.25
LAMBRETTA RB200 HEAD GASKET 66MM DIA. BORE 1.0MM
HEAD GASKET RB200 66MM DIA BORE 1.0MM THICKNESS..
£2.50 Ex Tax: £2.08
LAMBRETTA INNOCENTI HORNCAST BADGE SEW ON PATCH
LAMBRETTA INNOCENTI HORNCAST BADGE STYLE EMBROIDERED SEW ON PATCH, 9.3CM WIDE 4.5CM HIGH..
£3.90 Ex Tax: £3.25
LAMBRETTA GORI SPORT RACING SEAT- bolt down
Lambretta Series 1,2,3 and GP models , GORI ultra lightweight traditional sports racing seat. Fixed ..
£0.00 Ex Tax: £0.00
LAMBRETTA CARB- DELLORTO 28mm PHBH CARB KIT 200/225
LAMBRETTA 28MM DELLORTO CARB KIT TO FIT 200 /225 CAST IRON CYLINDERS +RAPIDO ,MUGELLO,BGM RT 190/2..
£0.00 Ex Tax: £0.00
LAMBRETTA BUBBLE FLYSCREEN ORANGE SX/TV/SPECIAL
60's style bubble fly screen for tv/sx & li special headset. in transparent orange, high q..
£98.99 Ex Tax: £82.49
LAMBRETTA DRAIN / LEVEL PLUG ALLOY ANODISED. JJP. GOLD
LAMBRETTA DRAIN / LEVEL PLUG ALLOY ANODISED GOLD , MAGNETISED WITH MATCHING WASHER BY JJP..
£13.99 Ex Tax: £11.66
LAMBRETTA DRAIN / LEVEL PLUG ALLOY ANODISED .JJP.BLACK
LAMBRETTA DRAIN / LEVEL PLUG ALLOY ANODISED BLACK , MAGNETISED WITH MATCHING WASHER BY JJP..
£13.99 Ex Tax: £11.66
LAMBRETTA HANDLEBAR BUSH SHIM KIT SERIES 3 LI SX GP
LAMBRETTA HANDLEBAR SHIM & BUSH KIT FOR SERIES ALL 3 LI , SX, TV, GT & GP MODELS, UNIV..
£21.00 Ex Tax: £17.50
LAMBRETTA BGM PRO CLUBMAN V4 EXHAUST .SILVER
BGM PRO BigBox Clubman V4 exhaust for Lambretta Series 1, 2 ,3 & GP Silver painted versionThe BG..
£239.99 Ex Tax: £199.99
LAMBRETTA HYDRAULIC BRAKE CALIPER-NISSIN
Complete Nissin caliper with pads for the hydraulic front brake disc conversions...
£84.99 Ex Tax: £70.83
LAMBRETTA BGM PRO CLUBMAN V4 FLANGE ADAPTOR TS1/IMOLA/MONZA
Manifold flange adaptor for the BGM clubman pro v4 exhausts to allow it to fit to the round type use..
£17.50 Ex Tax: £14.58
LAMBRETTA BGM PRO 225 70mm TS1 RB RT , REED VALVE PISTON , GRADE A
Piston for Lambretta bgm PRO RaceTour FOR reed valve intake, 70mm diameter. A GRADEThe ki..
£128.00 Ex Tax: £106.67
LAMBRETTA TOOLBOX LOCK SERIES 2 C.A.M.A
TOOLBOX LOCK SERIES 2 With C.A.M.A. logo as per originalWILL ALSO FIT SERIES 1 IF REQUIRED&nbs..
£19.99 Ex Tax: £16.66
LAMBRETTA EXHAUST STUDS ,NUTS ,WASHERS FITTING KIT
LAMBRETTA exhaust fitting kit, 2 x Brass 7mm nuts , 2 x studs , 2 x spring washers & 2 fl..
£4.50 Ex Tax: £3.75
LAMBRETTA EXHAUST STUD FITTING KIT AND BIG BORE GASKET
Exhaust fitting kit for all Lambretta models Series 1-3 inc Li, SX , TV & GP 125-225. Includes 2..
£6.95 Ex Tax: £5.79
LAMBRETTA EXHAUST STUD AND STANDARD GASKET FITTING KIT
Exhaust fitting kit for all Lambretta models Series 1-3 inc Li, SX , TV & GP 125-225. Includes 2..
£6.50 Ex Tax: £5.42
LAMBRETTA EXHAUST STUD AND GASKET FITTING KIT TS1/RB /IMOLA/MONZA
Exhaust fitting kit for all Lambretta models Series 1-3 inc Li, SX , TV & GP 125-225. Includes 2..
£6.95 Ex Tax: £5.79
LAMBRETTA BGM PRO CLUBMAN V4 REPLACEMENT BRACKET
Replacement upper mounting bracket with fittings for BGM PRO BigBox Clubman V4 exhaust for Lambretta..
£35.99 Ex Tax: £29.99
LAMBRETTA BGM PRO CLUBMAN V4 TAIL PIPE CLAMP
Tail pipe clamp for the BGM clubman pro v4 exhausts ..
£6.50 Ex Tax: £5.42
LAMBRETTA KICKSTART RAMP
LAMBRETTA KICKSTART RAMP .REMADE BY UNIFITS ALL SERIES 123 OR GP ( WITH REDRILLED /TAPPE..
£9.00 Ex Tax: £7.50
LAMBRETTA BGM EXHAUST GASKET BIG BORE RT195/225
LAMBRETTA BGM RT195/225 EXHAUST GASKET ..
£3.75 Ex Tax: £3.13
NEW LAMBRETTA V125 SPECIAL
THE NEW LAMBRETTA V125Lambretta Scooters Classic Scootering with a Modern Twist!The reputed It..
£3,299.00 £3,499.00 Ex Tax: £3,299.00
LAMBRETTA EXHAUST SPRING BGM CLUBMAN 50MM
Exhaust spring for BGM Clubman exhausts 50MM TOTAL LENGTH..
£3.50 Ex Tax: £2.92
LAMBRETTA EXHAUST SPRING BGM CLUBMAN 65MM
Exhaust spring for BGM Clubman exhausts 65MM TOTAL LENGTH..
£3.50 Ex Tax: £2.92
LAMBRETTA TOOLBOX LOCK SERIES 1& LD F.I.S.A.M.
TOOLBOX LOCK SERIES 1 AND LD With F.I.S.A.M. logo as per original..
£21.99 Ex Tax: £18.33
LAMBRETTA CASA PERFORMANCE SS225 PISTON RINGS 70mm
Piston rings for Lambretta CASA SS225 70mm diameter. two 1mm thick steel piston ringsCabe..
£39.99 Ex Tax: £33.33
LAMBRETTA BUBBLE FLYSCREEN BLUE SX/TV/SPECIAL
60's /70S style bubble flyscreen for tv/sx & li special headset. in transparent BLUE..
£98.99 Ex Tax: £82.49
LAMBRETTA FORK DAMPER GAITERS-MATT RED
Front fork gaiters for Lambretta's, As per 1960's original, Fits all ORIGINAL SLIM TYPE DAMPERS..
£14.95 Ex Tax: £12.46
LAMBRETTA BGM PRO 225 70mm TS1 RB RT , RV PISTON , GRADE B
Piston for Lambretta bgm PRO RaceTour FOR reed valve intake, 70mm diameter. B GRADEThe ki..
£128.00 Ex Tax: £106.67
LAMBRETTA BGM PRO 195 RT PISTON 65mm , GRADE A
Piston for Lambretta bgm PRO RaceTour 195CCThe piston is exclusively manufactured by the company Met..
£126.50 Ex Tax: £105.42
LAMBRETTA ST/SAE 90 GEAR OIL 1 L -SILKOLENE
LAMBRETTA SAE 90 GEAR OIL 1 LITRE ..
£11.45 Ex Tax: £9.54
-200x200.jpg "LAMBRETTA BUBBLE FLYSCREEN BLUE- LI3")
LAMBRETTA BUBBLE FLYSCREEN BLUE- LI3
60's /70S style bubble flyscreen for LI3 headset. in transparent BLUE, high qualit..
£89.99 Ex Tax: £74.99
LAMBRETTA BGM RT 195cc PISTON RINGS
Piston rings for Lambretta bgm PRO RaceTour piston RINGS , 195CC two 1mm piston rings&nbs..
£25.99 Ex Tax: £21.66
LAMBRETTA BGM PRO RT 225 PISTON 70mm , GRADE A
Piston for Lambretta bgm PRO RaceTour 225 CC GRADE A The piston is exclusively manufactured by ..
£119.99 Ex Tax: £99.99
LAMBRETTA DRAIN / LEVEL PLUG ALLOY ANODISED. SILVER BGM
LAMBRETTA DRAIN / LEVEL PLUG ALLOY ANODISED SILVER , MAGNETISED WITH MATCHING WASHER BY ..
£16.50 Ex Tax: £13.75
LAMBRETTA BGM PRO CLUBMAN V4 EXHAUST BARE METAL
BGM PRO BigBox Clubman V4 exhaust for Lambretta Series 1, 2 ,3 & GP Silver painted versionThe BG..
£239.99 Ex Tax: £199.99
LAMBRETTA CYLINDER HEAD COWLING LI SX TV GP
Scootopia made Lambretta series 3 LI/SX & TV style cylinder cowl. These are made with new toolin..
£42.75 Ex Tax: £35.63
LAMBRETTA CYLINDER HEAD COWLING GP/DL
Scootopia made Lambretta DL/GP cylinder cowl with fixed internal plate (can be fitted at all lambret..
£42.75 Ex Tax: £35.63
LAMBRETTA KICKSTART RAMP
LAMBRETTA KICKSTART RAMP FITS ALL SERIES 123 OR GP ( WITH REDRILLED /TAPPED HOLES)..
£8.95 Ex Tax: £7.46
LAMBRETTA BGM RT 225 cc PISTON RINGS
Piston rings for Lambretta bgm PRO RaceTour piston RINGS , 225CC 70MM two 1mm piston..
£44.00 Ex Tax: £36.67